Free Shipping available on Red Sea MAX E-170 Lid in the Continental USA
Product Information
Lid Styles
Kraken Reef lids are designed with your tank inhabitant's safety in mind while keeping your aquarium's stunning aesthetics. Our lid frame is proudly machined in the USA by Kraken Reef using a state of the art CNC from a single sheet of clear 3/8" polycarbonate stock. Installed in the middle of the lid is 1/4" polyethylene clear plastic mesh which is secured by a serrated vinyl retainer spline. If you intend to house smaller specimen (~1/4" diameter or less), we recommend the use of our Evaporation cover, or mesh is also user replaceable if you would prefer to change to a smaller mesh.
If the PREMIUM FEED style is selected, it will include a feed opening/hole in the frame, on the front right corner for single piece and multi piece peninsula style (if there is a filtration area, that is condisdered the rear on the tank) lids or choice of front side (to include both) on standard style multi piece lids and also includes a 3D printed cover made from reef safe 3D printed PETG plastic in black (additional colors available for purchase). To relocate the placement, please contact Kraken Reef prior to ordering for further instructions. Note: Some fish may have the power to jump and knock free the standard feed cover, in this case we would recommend use of the optional Feed Cup add-on to provide additional piece of mind.
The lid is secured in place on your aquarium by a machined lip around the perimeter of the lid. The machined lip will extend to ~1mm from the outside edge of your aquairum. The inner portion of the frame is recessed below the top of the aquarium glass and the outer portion of the frame rest on top of the aquarium glass. The lid can easily be removed in seconds from the aquarium for maintenance or cleaning with no tools.
The All-In-One (AIO), with the filtration area and overflows located at the rear of the aquarium, remain open and are not covered by the lid. This allows for equipment changes and updates without worrying about having to modify your new Kraken Reef lid. The lid frame will stop ~1mm from the back side of the filter wall. Filtration covers may interfere with the lid in this configuration, in which case a cutout may be added to have the lid cut to stop at the front side of the filter wall rather than extending over the filter wall. On some AIO aquariums, the filter wall is lower than the top of the glass. This may result in a small gap between the top of the filter wall and the lid. It is recommended that you install an item to extend the filter wall height to reduce this gap to 1/8" or less.
Cord slots and cutouts are optional. Cord slots will protrude into the tank display area 8mm x 12mm if placed along the edge or 12mm x 12mm if placed on a lid corner. Note: Cutout(s) for light mounts may be required if the light mount is located in the same location as the lid.
Some Red Sea aquariums come equiped with armored seams on their corner seams. Kraken Reef Red Sea lids have provisions for this seam on all corners, which will work on aquariums with and without armored seams.
Optional Add-ons
EVAPORATION COVER: Kraken Reef evaporation covers allow you to have that convertible top option. This removable solid polycarbonate piece is designed to help reduce water evaporation in your aquarium. The cover will be made from 1/4" nominal clear polycarbonate. The cover is secured in place on your lid by a machined lip around the perimeter of the cover, with the inner portion of the cover being recessed below the top of the lid. Note: Condensation may build up on bottom of cover, and reduction of light output into the aquarium (PAR) may occur. Also, weight of the cover may cause deflection in the lid when installed.
PREMIUM FEED COVER: Kraken Reef premim feed covers are designed for the premium feed style lid. A black version of the cover is included when you purchase the premium feed style lid. Additonal colors are available in reef safe 3D printed PETG plastic.
FEED CUP: Kraken Reef feed cup is a convenient and hassle-free way to feed. This cup fits inside the PREMIUM FEED feed hole and allows placement of frozen food to defrost while still keeping your inhabitants safe. Multiple colors available in reef safe 3D printed PETG plastic. Note: The premium feed cover is not used when the feed cup is installed.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Important Information
Each lid is specifically designed to fit the tank indicated in the product title. If you are uncertain about your exact model, please contact us BEFORE placing your order for assistance. Any notes, sketches or photos regarding the tank dimensions, glass thickness and/or model name will not be utilized to verify the aquarium model once the order is placed. Any lid design changes, to include modifications of lid dimensions, converting to a solid lid with no mesh, Premium Feed option non-standard placement, ect, must be communicated to Kraken Reef BEFORE placing your order in order for us to provide further instructions on properly placing your order.
All lids are made to order. Current production lead times are displayed at the top of page. Production lead time for lids begins when your order is placed (production lead time denotes the duration required for a product to navigate through our production pipeline regardless of lid size, cutouts and/or modifications) and ends when your order is packaged and shipping label is created. If purchased with other items, it may be shipped separately via USPS First Class Mail or suitable substitute delivery method. Polycarbonate may have superficial particles, tooling marks and/or scratches due to the manufacturing process. Due to the implementation of a larger mesh retaining spline (to have a better/stronger hold on the mesh), there may be visible deflection/curvature of the lid frame, this will naturally reduce during normal lid use. The lid's mesh is installed by hand and may have minor deviations. Guarantees of livestock are not implied. Returns/refunds are not authorized.
Photos and graphics depicted on this product page may not be of the specific aquarium model and may have a different shape, orientation, optional cord slots, cutouts and/or add-ons. Light mount cutouts and cord slots are not included by default. These photos and graphics are for reference of the general lid design.
If damage during shipping occurs, notify us immediately at info@krakenreef.com.
Proper lid use and cleaning instructions may be found under the MORE INFO section at the bottom of this page.